Search
Filters
Close
For Questions or Technical Support Please Call Duncan MaCrae at 908-413-2927

CENTRIPRO 5 HP SUBMERSIBLE MOTOR | M50434

Part Number 13-501-010
SKU: 13-501-010
Manufacturer part number: M50434
$1,004.37

CentriPro M50434 Specifications
• 5 hp 
• 3-Wire (3 Wires plus Ground)
• 460 volt 
• 60 Hz - THREE PHASE 
• 3450 RPM 
• Full Load Amps: 7.6 amps ( 4810 Watts )
• Service Factor: 1.15 
• Service Factor Amps: 8.5 amps ( 5530 Watts )
• Locked Rotor Amps: 48.0 Amps
• Continuous Duty Rated 
• Kilowatts Rating: 3.7 KW 
• Length 27.7 in 
• Weight 55.00 lbs

Standard Features Goulds / CentriPro Three Phase 4" Motors
• 304 SS casing and end bells for corrosion resistance
• Kingsbury type, 3 shoe, thrust bearing, see chart for ratings.
• Stainless steel, 17-4 PH splined shaft
• Removable, replaceable 48" (½ - 2 HP) or 100" (3 - 10 HP)
• Water lubricated with filter/check valve to maintain fluid fill
• Lightning and surge protection built-in on 200 V and 230 V models
• Magnetic starter with Class 10, quick-trip overload protection required
• UL 778 Recognized
• CSA Certified
• NEMA Mounting Dimensions
• Tested to ANSI/NSF 61

Applications for CentriPro 4 Inch Submersible Motors
• These 4" motors are designed and sized for installation in 4" diameter or larger water wells.

CentriPro M50434 Specifications
• 5 hp 
• 3-Wire (3 Wires plus Ground)
• 460 volt 
• 60 Hz - THREE PHASE 
• 3450 RPM 
• Full Load Amps: 7.6 amps ( 4810 Watts )
• Service Factor: 1.15 
• Service Factor Amps: 8.5 amps ( 5530 Watts )
• Locked Rotor Amps: 48.0 Amps
• Continuous Duty Rated 
• Kilowatts Rating: 3.7 KW 
• Length 27.7 in 
• Weight 55.00 lbs

Standard Features Goulds / CentriPro Three Phase 4" Motors
• 304 SS casing and end bells for corrosion resistance
• Kingsbury type, 3 shoe, thrust bearing, see chart for ratings.
• Stainless steel, 17-4 PH splined shaft
• Removable, replaceable 48" (½ - 2 HP) or 100" (3 - 10 HP)
• Water lubricated with filter/check valve to maintain fluid fill
• Lightning and surge protection built-in on 200 V and 230 V models
• Magnetic starter with Class 10, quick-trip overload protection required
• UL 778 Recognized
• CSA Certified
• NEMA Mounting Dimensions
• Tested to ANSI/NSF 61

Applications for CentriPro 4 Inch Submersible Motors
• These 4" motors are designed and sized for installation in 4" diameter or larger water wells.