FLOW SENSOR REPAIR KIT | 220 SERIES | 230FRK

Kit includes the following:

Tungsten Carbide Shaft
2- EPDM O-Rings (for Hex Mounting Adaptor)
Glass Reinforced Nylon Impeller
UHMWPE Bearing

The 220B brass water flow sensor and 220SS stainless steel water flow sensor are used in general to measure water flow in metallic or PVC pipes from 2-1/2&#8243 to 40&#8243 (6.4 to 101 cm) size. Each sensor can mount in a 2" NPT pipe saddle or Thredolet®. Positioning nuts on the three threaded retaining rods allow the sensor to be accurately positioned to a standard insertion depth of 1-1/2" into the pipe. When this insertion depth is maintained, and there are at least 10 upstream and 5 downstream diameters of straight uninterrupted flow, an accuracy of ±1% of actual flow rate can be obtained between flow velocities of 0.5 to 30 ft/sec. Ideal for Building Automation Systems, BAS, and HVAC applications, the standard 200 Series flow sensors are rated for water temperatures to 221 ℉. For higher temperature requirements, see the SDI Series.