Search
Filters
Close
For Questions or Technical Support Please Call Duncan MaCrae at 908-413-2927

PRESSURE TRANSDUCER | WIKA | 250PSI

Part Number 85-003-019-WIKA
SKU: 85-003-019-WIKA
Manufacturer: WIKA
$234.77

This pressure transducer is an alternate to the GEMS 250 and KPSI transducers.  This pressure transducer is mainly used on Xylem / Flowtronex pump stations, but may work in other applications as well.  Please contact us for more detailsThis transducer  will work for any applicattion where a 0-250 PSi range with 4-20 milliamp output is called for. Also a direct replacement for Druck transducers on older Flowtronex PSI stations.

 

NOTE:  This transducer can be used as a direct replacement for the GEMS or KPSI transducer. 

Pressure transmitter Model S-20
for general applications, superior
non-linearity: 0.5% BFSL
Pressure range: 0...250 psig
Process Connection: 1/4 NPT
permitted media temperature: -30...+100°C
Signal output: 4...20 mA, 2-wire
Power supply: DC 8...35 V
Electrical connection: 1/2 NPT conduit with cable outlet
Cable end: free cable end, with ferrules
Performance Level: without
Cable length: 6 ft
pin assignment el. connection: U+=RD, U-=BK, shield=GY
shielding: connected
Approvals: cULus
Overpressure safety: 2 times
Calibration Temperature: 15 ... 25 °C
shock and vibration resistance: 100 g shock, 10 g vibration
Test protocol: with test protocol
Specifications: according to WIKA data sheet PE 81.61
customer specific: WIKA standard - specification according to data sheet
Import documentation CIS-States: without

This pressure transducer is an alternate to the GEMS 250 and KPSI transducers.  This pressure transducer is mainly used on Xylem / Flowtronex pump stations, but may work in other applications as well.  Please contact us for more detailsThis transducer  will work for any applicattion where a 0-250 PSi range with 4-20 milliamp output is called for. Also a direct replacement for Druck transducers on older Flowtronex PSI stations.

 

NOTE:  This transducer can be used as a direct replacement for the GEMS or KPSI transducer. 

Pressure transmitter Model S-20
for general applications, superior
non-linearity: 0.5% BFSL
Pressure range: 0...250 psig
Process Connection: 1/4 NPT
permitted media temperature: -30...+100°C
Signal output: 4...20 mA, 2-wire
Power supply: DC 8...35 V
Electrical connection: 1/2 NPT conduit with cable outlet
Cable end: free cable end, with ferrules
Performance Level: without
Cable length: 6 ft
pin assignment el. connection: U+=RD, U-=BK, shield=GY
shielding: connected
Approvals: cULus
Overpressure safety: 2 times
Calibration Temperature: 15 ... 25 °C
shock and vibration resistance: 100 g shock, 10 g vibration
Test protocol: with test protocol
Specifications: according to WIKA data sheet PE 81.61
customer specific: WIKA standard - specification according to data sheet
Import documentation CIS-States: without